Amana 3-1/8 3-Wing Straight Edge Cutter

Get the Amana 3-1/8" 3-Wing Straight Edge Cutter for all your shaping needs. With over 250 different cutters, this tool offers extra-thick carbide tips for longer tool life and many resharpenings. It has a 12,000 RPM rating and under, 1/4" of cutting heig
A leading provider of quality products to the woodworking industry.
Features:• Over 250 different cutters for all your shaping needs• Extra-thick carbide tips offer many resharpenings and longer tool life• 12,000 RPM rating and under• 1/4 of cutting height• 1/2 and 3/4 of bore• Cutters are furnished with either 1/2, 3/4 or 1-1/4 bore• Cutters with 3/4 bore include 2 reduction bushings (1/2 x 3/4) which will reduce the bore to 1/2• Cutters with 1-1/4 bore include 2 reduction bushings (1 x 1-1/4) which will reduce the bore to 1

Amana 917 Carbide Tipped 3-Wing Straight Edge 3-1/8 D x 1/4 CH x 1

(D) diameter: 5-1/2 (D) Bore: 1 & 1-1/4 (B) Cutting height: 5/8 (R) radius: 1-57/64 Optional rub collar: c-017

Amana Tool - SC500 Carbide Tipped 3-Wing Cove Raised Panel 5-1/2 Dia x 5/8 x 1 & 1-1/4 Bor

Amana Tool 1/2 D x 3/8 CH x 6mm Shank CNC Double-Edge Folding V

Amana 3-1/8 3-Wing Straight Edge Cutter

AM SC555 Shaper Cutter Deg Bevel 3-1/2 x 5/8

45672 Carbide Tipped Flooring Straight Dedicated Cutter 1-1/8 Dia

Amana Tool HSS1611 HSS Straight V Flute Foam Cutting 1/4 D x 1

Amana 969 Carbide Tipped 3-Wing Ogee 1/2 Radius x 3-1/4 Dia x 7/8 x 1/2 & 3/4 Bore

Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra-smooth finish. The fully hardened and tempered steel shank provides ultimate durability.

Bosch 85216MC 1/2 in. x 1 in. Laminate Flush Trim Carbide-Tipped Router Bit

These sets include two trim cutters for stock 7/8 through 1 in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8 thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8 to 1 thick, a template must to used.

Amana 55420 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 D x

Lock Miter Shaper Cutter - Amana Tool SC619, 4-17/32 D x 1 CH Cutter

(D) diameter 3-1/8 (B) Cutting height 1/4 USA Corporate headquarters and warehouse, located in new York Commitment to offer the highest consistent

Amana Tool - 917 Carbide Tipped 3-Wing Straight Edge 3-1/8 Dia x 1/4 x 1/2 & 3/4 Bore

Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Each assembly includes a cutter, bearing for a 1/2′′ deep cut, and either a 1/4′′-, 3/8′′-, or 1/2′′-shank arbor. Use in a handheld or table-mounted router. All assemblies include cutter, arbor and ball bearing.

Amana Tool 53410 Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 1/4 x 1/4 inch Shank

Amana 45660 T-Slot Square Edge 1-1/8 Dia x 13/16 Cut Height x 1/2 Shank Router Bit Designed for creating T-slot wall panels used to cut their characteristic slots for many purposes and radiused edges on the T-slots allow easier adjustment of fixtures on the completed wall panels. For best results use in CNC and table-mounted routers. Note: These tools are designed for groove-forming T-slot wall panels they are not designed for plunging operations.

Amana 45660 T-Slot Square Edge

2018 Amana Tool® Catalog Pages 201-250 - Flip PDF Download