WHEEL CLEANING SIMPLIFIED Iron X will have your paint and wheels looking amazing and in record time. Sometimes wheel cleaners won't be able to achieve perfection.The little extra build up of black or brownish specs and dirt will remain. Iron X will react with it and turn it purple then watch it dissolve and rinse away
WHEEL CLEANING SIMPLIFIED
Iron X will have your paint and wheels looking amazing and in record time. Sometimes wheel cleaners won't be able to achieve perfection.The little extra build up of black or brownish specs and dirt will remain. Iron X will react with it and turn it purple then watch it dissolve and rinse away with water! It will have the same effect with iron particles that are lodged in your clear coat. You may think your paint doesn't have that problem, but spray some on your trunk or rear bumper and I bet you will see it react and turn purple!
Why We Use It
It is very hard to decontaminate paint fully before polishing and ceramic coating. Iron X is that missing link that will remove everything the Clay Bar will miss. It will also remove the dirt on your wheels that your Wheel cleaner will be unable to remove. Iron X is the next and final step in getting tough build up off wheels and paint.
APPLICATION
Apply to your wheels when you notice build up or every few months for a really deep clean. Don't spray too much. Cover the wheel and let dwell. No need to keep spraying after you have covered the wheel once.
Paint should be sprayed down thoroughly and rinsed and washed after Iron X application. Iron build up usually happens in the rear of the car and on lower panels behind the wheels but most cars will have iron contamination all over if it has never been treated.
LONGEVITY
This bottle will last a few months at a time if you are using a wheel cleaner and applying Iron X when needed here and there. Paint only needs Iron X when you see that it needs it, or once a year on daily drivers. Iron X should not be used as your every car wash wheel cleaner.
FROM THE MANUFACTURE
Highly effective, acid-free and pH balanced, CarPro Iron X stops rust spots and pre-mature failure of the clear coat by making short work of iron contaminant removal across the entire vehicle! Using Iron X saves time and helps avoid the laborious claying process used in traditional car care regimes. This formulation of CarPro Iron X is safe and effective for use on all car surfaces and will not deteriorate clear coats. This preventative measure puts a stop to pre-mature corrosion.
Airborne chemical compounds and ferrous particles (particles containing iron) actually penetrate the paint and create corrosive compounds that eat deep into the paint's sub-layers. This is a gradual process that is not evident until it's too late.
Iron X contains unique chemical ingredients that effectively dissolves the sintered iron by forming a water soluble iron complex. No other method cleans paint and wheels as deeply as Iron X. The Iron X Paint and wheels decontamination system was developed to remove the root of the problem (BELOW the top surface) rather than just shave off the top of the particle in the manner traditional claying offers.
During the use of your vehicle, brake dust and road grime become sintered to the surface of the paint, rims, and wheels due to the high temperatures they are exposed to. Brake dust contains high levels of iron and once sintered to the rim, becomes extremely difficult to dissolve or remove without the use of harsh chemicals. Iron X opens up the paint's pores to release ferrous particles and to neutralize caustic compounds that have developed in the paint's subsurface. Ongoing damage is immediately stopped and future damage is prevented, by removing the ferrous particles.
Iron X sprays on as a transparent liquid. As the cleansing liquid begins to work into the dirt and grime, the formula begins to turn purple or red. This coloring affect is the Iron X Cleaner forming a bond to the sintered iron on the car paint or wheel and changing its state to a water-soluble complex for easy wipe or rinse off. Stubborn, baked on grime may take a small amount of agitation.
Iron X is widely used by body shops, high-end detailers, and even dealerships for new and used car prep. It is proven to deliver a clean, glassy smooth vehicle free of iron contaminants. No other iron decontamination product is as safe, fast, and effective! Purchase yours from Sky’s the Limit Car Care today!
Features:
Removes Iron Particles and prevents the spread of iron-related damage & helps to protect your vehicle from paint system failure.
Safe to use, Acid Free, and pH neutral (pH 6-7).
Safe to use on Clear Coat Paint
Safe to use on Aluminum, Chrome, Alloy, or Clear coated wheels.
Safe for use on all solid car surfaces and will not deteriorate clear coats.
Directions:
Shake Bottle
Wash vehicle, Rinse vehicle, and remove the majority of the water with a quick towel once-over
Spray Iron X across the contaminated area or vehicle.
After 2-5 minutes rinse off or wash off if dried (depending on environment and temperatures)
Verify all Iron X is removed and dry vehicle
Remove nozzle and replace cap after use (to avoid leakage over time)
Precautions:
Avoid using on Fabric Convertible tops or rubber that contains recycled tires
Keep out of reach of children and pets
Do not ingest
Use outside or in ventilated area
Avoid prolonged contact with skin
Avoid inhalation
Use PPE as needed
Iron X Facts and Frequently Asked Questions:
How iron particles appear on your car surface and where?
Iron particles are all around us, and of course on our cars after traveling. They can be made from your car braking, driving near other cars, big trucks, train rails, industrial zones etc. They adhere to the car surface and once they stick to your paint due to there sharp edges together with sunshine they start to bake into the soft car paint where they oxidize and rust.
How to prevent iron dust from etching your paint ?
It’s almost impossible to prevent the irons to stick on the surface , but it has been proven that inorganic coatings (CQuartz) has a self-cleaning affect and can reduce the quantity of iron that adheres to the surface.
Is Iron X pH Neutral?
Yes
Why does it change color?
With Iron X it is due to chemical reaction between the chemicals and iron. Some other products change colors as well. There are very cheap chemicals other companies use that change their character simply by contact with air or iron but have zero to little dissolving power.
Why do you use fully plastic spray heads?
Iron X would react with normal triggers with metal springs inside.
Will Iron X stain chrome wheels or chrome trims?
No, it’s completely safe to use on any chrome wheels, trim, or bare aluminum wheels.
Will Iron X discolor wheel weights ?
Yes, it will. Wheel weights are made from lead, Iron X will change the lead color to green. However light agitation will recover the original color.
Will Iron X affect brake calipers ?
For most high end calipers it will not affect them however it can affect the paint color of low quality acrylic painted calipers. For this reason we advise you to be careful near calipers if unsure of the finish or type of paint.
Will Iron X remove wax from car paint?
Yes, if it’s a highly organic oil type it will affect the wax properties. If it’s a synthetic polymer sealant it won’t affect it much. On CarPro Sealants, Cquartz coatings, or other true coatings it won’t affect them at all. In fact it is designed for use on coatings as well.
Does Iron X remove tar spots as well?
No, Iron X reacts only with iron particles.
Is Iron X safe to use on 3M and Paint Protection Film?
Yes, there is no problem at all using it on clear bra and modern PPF when used properly.
Why does it smell so bad?
This is the nature of the chemical used, you cannot avoid this. If it doesn’t smell so strong it means it has very little effect on iron or is a very diluted or inferior formula.
Why does Iron X have low viscosity?
If you make the product too thick it will not react well with iron particles due to the thickener additives. If you make it too thin there will only be a short reaction time, which will leave some iron behind. With Iron X we have found the sweet spot between these two variables to create the most potent but safe iron fallout remover on the market.
Can I leave Iron X to dry on the surface?
Yes, Iron X could dry on the surface of a modern gloss clear coat paint system as long as you wash it off, but do not let it dry on the surface when under direct sun.
CARPRO IronX Iron Remover: Stops Rust Spots and Pre
CARPRO IronX Auto Paint Iron Remover
CarPro Iron X – Status Detail
Is Iron X dangerous? Will Iron X hurt me?
CARPRO IronX Auto Paint Iron Remover
WHEEL CLEANING SIMPLIFIED, Iron X will have your paint and wheels looking amazing and in record time. Sometimes wheel cleaners won't be able to
CarPro Iron X
CARPRO IronX Auto Paint Iron Remover
CARPRO IronX Iron Remover: Stops Rust Spots and Pre-Mature Failure
CarPro Iron x Iron Remover - 500 ml
Our CarPro Tar & Iron Decontamination Kit provides everything you need to easily remove iron, brake dust, tar, and organic particles from your car!
CARPRO Tar & Iron Decon 1 Liter Bundle*
CarPro Iron X – Status Detail
CarPro Iron X – Status Detail
CARPRO IronX Paste 150ml (5oz)
WHEEL CLEANING SIMPLIFIED Iron X will have your paint and wheels looking amazing and in record time. Sometimes wheel cleaners won't be able to achieve
CarPro Iron X