SHINWA 11215 Stainless Carpenter's Framing Square 30cm Japan Japanese -  Osaka Tools

SHINWA 11215 Stainless Carpenter's Framing Square 30cm Japan Japanese - Osaka Tools

4.8
(426)
Write Review
More
$ 14.50
Add to Cart
In stock
Description

Shinwa Framing square 11215 Well deep-etched readable graduation on both sides. Outside : 300mm x 150mm Inside : 250mm x 100mm Accuracy : ± 0.1mm or less per 100mm Size : 320mm x 160mm x 2mm Weight : about 140 grams Made of stainless steel. Made in Japan.

Shinwa Framing square 11215

Well deep-etched readable graduation on both sides.
Outside : 300 mm x 150 mm
Inside : 250 mm x 100 mm

Accuracy : ± 0.1 mm or less per 100 mm

Total size : 320 mm x 160 mm x 2 mm
Weight : about 140 grams
Made of stainless steel.

Made in Japan.


Shinwa TRY Square 4.5 cm, 6 cm, 7.5 cm, 9 cm
Made of stainless steel and brass.

Size 4.5 cm 62020 :
45 mm x 40 mm x 6 mm
Weight : about 25 grams
Accuracy : ± 0.04 mm or less per 45 mm

Size 6 cm 62021 :
60 mm x 45 mm x 6 mm
Weight : about 30 grams
Accuracy : ± 0.06 mm or less per 60 mm

Size 7,5 cm 62022 :
75 mm x 52 mm x 6 mm
Weight : about 45 grams
Accuracy : ± 0.07 mm or less per 75 mm

Size 9 cm 62023 :
90 mm x 60 mm x 6 mm
Weight : about 50 grams
Accuracy : ± 0.09 mm or less per 90 mm


Shinwa layout square miter ruler 62113 for
45 and 90 degrees angles.

Well deep-etched readable graduation on both sides.

Size : 168 mm x 73 mm x 63 mm
Weight : about 100 grams

Made of aluminum, light and durable. 

Made in Japan.


Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 120 mm x 120 mm x 70 mm (4.7
x 4.7 x 2.7)
Weight : 165 grams

Made of Oak and carbon steel.

Made in Japan.


Shinwa Try square 62009.

Well deep-etched readable metric graduation on both sides.

Size : 175 mm x 100 mm x 8 mm
Weight : about 110 grams

Accuracy : ± 0.1 mm or less per 100mm

Made of stainless steel.


Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.

Well deep-etched readable graduation on both sides.

Size : 168 mm x 100 mm x 15 mm
Weight : about 220 grams

Made of stainless steel.


Shinwa Pick up scale ruler with well deep-etched readable graduation. The silver-colored finish reduces reflection on the surface and makes it easy to read. The end of the ruler is bent for an easier pick up.

Made of stainless steel with an accuracy of 
±0,15 mm

Size 15 cm 13131 :
175 mm x 15 mm x 0.5 mm 
Weight : about 10 grams

Size 30 cm 13134 :
335 mm x 25 mm x 1 mm
Weight : about 60 grams


Shinwa 150 mm 250 mm sliding bevel

150mm 62588 :
Size : 182 mm x 14 mm x 20 mm
Weight : about 110 grams

250mm 62596 :
Size : 250 mm x 19 mm x 20 mm
Weight : about 200 grams

Made of stainless steel.


Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. 

It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.

Size : 110 mm x 120 mm x 70 mm (4.3
x 4.7 x 2.7)
Weight : 165 grams

Made in Japan.


Shinwa 62490 20 cm protractor.

Size : 198 mm x 50 mm x 15 mm
⦰90 mm
Weight : about 80 grams

Made of stainless steel.


Shinwa 15cm caliper 19899

0-150 mm with a precision of :
± 0,05 mm from 0 to 50 mm
± 0,06 mm from 50 to 100 mm
± 0,07 mm from 100 to 200 mm

Size : 235 mm x 75 mm x 7 mm
Weight : about 150 grams

Made of stainless hardened steel.


Japanese 150 mm Shinwa moulage gauge profile contour profile templates 77970.

This is the small model.

Size : 150 mm x 84 mm x 18 mm
Weight : about 230 grams
Needles : 84 pieces x 0,8 mm (84 mm long)
Maximum size you can copy : 148 mm x 49 mm

Made in Japan.


Japanese 300 mm Shinwa moulage gauge profile 77971.

This is the big model.

Size : 300 mm x 150 mm x 31 mm
Weight : about 1 kg
Needles : 150 pieces x 1 mm (150 mm long)
Maximum size you can copy : 293 mm x 106 mm

Made in Japan.

Japanese framing squares

Home

SHINWA Square Layout Miter ruler 45 + 90 Degrees 62114 aluminum Japan - Osaka Tools

SHINWA Square Layout Miter ruler 45 135 Degrees 62060 stainless steel - Osaka Tools

SHINWA Protractor 10cm ⦰40mm Stainless steel 62995 Made in Japan - Osaka Tools

Shinwa Framing square 11215 Well deep-etched readable graduation on both sides. Outside : 300mm x 150mm Inside : 250mm x 100mm Accuracy : ± 0.1mm or

SHINWA 11215 Stainless Carpenter's Framing Square 30cm Japan Japanese - Osaka Tools

Shinwa Framing square 11215 Well deep-etched readable graduation on both sides. Outside : 300mm x 150mm Inside : 250mm x 100mm Accuracy : ± 0.1mm or

SHINWA 11215 Stainless Carpenter's Framing Square 30cm Japan Japanese - Osaka Tools

Shinwa 87398 12 x 6 Stainless Steel Squares Imperial Graduations in 1/16ths and 1/32nds

Japanese framing squares

SHINWA sliding adjustable precision angle bevel 30cm 62660 aluminum - Osaka Tools

Shinwa Kane-Jyako Flexible Carpenter's Square