Jewelers Equipment Tools and Supplies
1 X New 60 Mm Aluminum 2 Part Mould Rings Delft Clay Peterobond Sand Casting Etc - Denmark
Delft Clay Casting Kit — Otto Frei
Sand Casting Mould Aluminium Sand Casting Flask Delft Style 60mm X 68mm hole 1kg Sand 1290
Sand Casting Set with 10 Lbs of Petrobond Sand Casting Clay, 100 MM Mold Frame, Cast Iron Flask, & Heat-Resistant Gloves, KIT-0143
Купить sand casting mold frame cast iron 2 part flask for jewelry
Delft Clay Casting - Canada
Delft Clay Casting: (Upcycling Jewelry) Recycling Broken/Unwanted
INSTRUCTIONS: Delft Clay mold is created in these steps: 1. Fill and compact the Clay into one half of the aluminum ring frame 2. Remove excess clay with a straight edge (e.g. a flexible steel ruler) 3. Press your original pattern halfway into the clay. 4. Brush Mica Powder or talcum powder over this surface of the mold 5. Install the other half of the aluminum ring frame, fill it with clay, and compact 6. Open the ring frame and remove the pattern 7. Carve out a pouring channel and vents 8.
Delft Clay Casting Sand Kit Gold Silver Pewter Aluminum -Set Includes Ring & DVD
Delft Sand Casting Mold
CA9000 = Delft Clay Casting Kit by FDJtool - FDJ Tool
🟢 It is an ideal vessel for casting with sand or clay. 2-PART ROUND FLASK FOR SAND CASTING. 🔸 Inside Depth: 3-31/64 (88.44mm). 🔸 Wall Thickness
Mold Rings For Delft Clay Sand Casting 100 MM Aluminum 2 Part Ring Mold Frame
Delft Sand Casting Mold
Delft Jewelry Part