Georgia Hardwoods Inc  Titebond Translucent Glue

Georgia Hardwoods Inc Titebond Translucent Glue

4.8
(161)
Write Review
More
$ 10.99
Add to Cart
In stock
Description

Description
Titebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sandability and is unaffected by finishes. Titebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.
Product Features
  • Passes Type II water-resistance testing
  • Slower speed of set - Longer open time
  • Hot press and R-F compatible
  • Solvent-resistant
  • Excellent sandability
Caution Statement
CAUTION: EYE AND SKIN IRRITANT. Contains urea. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Application Guidelines
  • Application Temperature: Above 60°F.
  • Open Assembly Time: 15 minutes (70°F./50% RH)
  • Total Assembly Time: 20-25 minutes (70°F./50%RH)
  • Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon
  • Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
  • Method of Application: Easily spread with a roller spreader or brush or may be transferred to plastic bottles for finer gluing applications.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond II Extend Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 60°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. Because of variances in the surface of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Technical Support Team at 1-800-347-4583. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.

Titebond Wood Glue - Dakota Premium Hardwoods

Titebond Extend High Strength Wood Glue 1 gal - Ace Hardware

Hiding hairline glue joints once the glue has set?

Titebond Polyurethane High Strength Glue 8 oz - Ace Hardware

8 oz. Translucent Wood Glue Virtually invisible glue line Provides a fast set and strong bond Excellent heat resistance Sets faster than most other

Franklin International 6123 Titebond Trans Glue, 8-Ounce

Titebond Original Wood Glue 32 fl oz 946ml 3 Pack

Georgia Hardwoods Inc Titebond Cold Press Wood Glue

Georgia Hardwoods

1 Gallon Jug

Titebond Speed Set 1 Gallon