Mold Making Silicone Thinner - GT Products, Inc

GT Products silicone thinner can be used to drop the viscosity of any mold making silicone.   This thinner is a 50 Centistoke Dimethyl Fluid and will be compatible with any GT Products Silicone system.   Lowering the viscosity of a mold making system can allow the silicone to easier flow into smaller detail. GT Products, Inc.  recommends only adding  3% to 5%.  Adding too much silicone fluid can adversely effect the physical properties of the silicone itself.  Tear and tensile strength will be the most greatly effect properties if too much silicone thinner is used.

RTV-2 Platinum Silicone Rubber Liquid Silicone Rubber Mold Maker 1

PIXISS Liquid Silicone Rubber for Mold Making - 128oz. Kit – Pixiss

Description Downloads Cast-a-Mold silicone thinner is a dimethyl fluid with a viscosity of 50 cps. This thinner will be compatible with any of our

Silicone Thinner

Factory Direct Production Silicone Manufacturers Liquid Silicone

Polytek - Chemical Concepts

Home - GT Products, Inc

Mold Making Silicone Thinner - GT Products, Inc

Compression Molding Epoxy - Entropy Resins

Teexpert Amazing Mold Maker, Silicone Mold Making Kit, Liquid Translucent Silicone Rubber Molds Making Set 1:1 Mixing Ratio for DIY Epoxy Resin

Teexpert Silicone Mold Maker, Liquid Translucent Silicone Rubber Mold Making Kit For Casting Molds

GT Products© 2241 is a room temperature curing silicone rubber compound designed for the manufacture of flexible molds.Applications include:Hobby and

GT-2241 (40 - 45 Shore A)

【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb,

BBDINO Silicone Mold Making Kit, Fast Cure Soft Mold Making Silicone Rubber 2.2 lb(35 Oz), Liquid Silicone for Mold Making, for

Adhesives - Chemical Concepts

SLIDE® EconoMIST Mold Release (No. 41612N)

Print-On® Gray Silicone Ink - Raw Material Suppliers

Patriot Series - Silicone Mold — Wissen Design Inc - PTownSubbie