Application by hand: Mist the Wolfgang German Polish N Wax Applicator with McKee’s 37 Pad Conditioner to moisten the foam. Apply a nickel size amount of Menzerna Super Finish to the applicator. Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Cobra Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done. Note: Applying Menzerna Super Finish by hand will enhance gloss but it will not remove swirls. For paint correction, you must apply this product with a polisher. Application by Machine: Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Super Finish out of direct sunlight. Use a soft foam finishing pad, like Lake Country’s CCS Gray Finishing Pad or the White Ultrafine Polishing Pad by The Edge. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area. Polish at 1200-1800 RPM (5-6 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes
Application by hand: Mist the Wolfgang German Polish N Wax Applicator with McKee’s 37 Pad Conditioner to moisten the foam. Apply a nickel size amount of Menzerna Super Finish to the applicator. Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Cobra Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done. Note: Applying Menzerna Super Finish by hand will enhance gloss but it will not remove swirls. For paint correction, you must apply this product with a polisher.
Application by Machine: Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply Super Finish out of direct sunlight. Use a soft foam finishing pad, like Lake Country’s CCS Gray Finishing Pad or the White Ultrafine Polishing Pad by The Edge. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area. Polish at 1200-1800 RPM (5-6 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing. Wipe the area with a damp microfiber cloth. Always apply a wax or sealant after polishing.
Menzerna Heavy Cut Compound 400 - 32 oz - Detailed Image
Menzerna Super Finish Polish 3500 - High Gloss Car Polishing Compound - Quart
MENZERNA – AUTOFINISH®
Menzerna Super Finish Plus 3800 (8oz)
MENZERNA – Om Bodyshop
Menzerna Polish and Compound Combo Kit 32oz
Menzerna 3500 Super Finish Swirl Remover Abrillantador 8oz
New and improved Super Finish cuts faster, dusts less, and leaves an incredible gloss!
Application by hand: Mist the Wolfgang German Polish N Wax Applicator with McKee’s 37 Pad Conditioner to moisten the foam. Apply a nickel size amount
Menzerna Super Finish 3500 (8oz)