STRONN Polyurethane Heat Activated Adhesive Glue Automotive Upholstery – cmodd
8OZ STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures
8OZ STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue
FOR INDUSTRIAL OR PROFESSIONAL USE ONLY.
One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures.
And for automotive upholstery
Made in USA
How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours.
Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers).
DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY
CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
8OZ STRONN Heat Activated Adhesive For Automotive Upholstery and Shoe Sole Glue FOR INDUSTRIAL OR PROFESSIONAL USE ONLY. One-component polyurethane adhesive is designed for shoe production (gluing soles from TEP, PVC, polyurethane, tunit, genuine leather, rubber, etc.). Fast to glue and resistant to high temperatures. And for automotive upholstery Made in USA How to use: It is used at a temperature not lower than 18°C. Clean both surfaces and apply on each 1-2 layers of glue and allow to dry for 15-20 minutes. Then the surfaces are heated with a dryer at a temperature of 130F and immediately very tightly press for 3-5 seconds. Final adhesion is achieved after 24 hours. Add 3-5% of hardener improves the adhesion of all and especially difficult to adhere materials (SBR rubber, TEP, PU, PVC, ABS, greased leathers). DANGER! HIGHLY FLAMMABLE LIQUID AND VAPOR, CAUSES SERIOUS EYE IRRITATION, CAUSES SKIN IRRITATION, MAY CAUSE AN ALLERGIC SKIN REACTION, MAY CAUSE DROWSINESS OR DIZZINESS. MAY DAMAGE FERTILITY OR THE UNBORN CHILD, CAUSES DAMAGE TO NERVOUS SYSTEM AND SENSORY ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions
Upholstery and Foam Adhesive - gallon - Action Upholstery Supply
STRONN Polyurethane Heat Activated Adhesive Glue Automotive Upholstery – cmodd
Car Upholstery Glue
Performance evaluation of 3D printing technologies: a review, recent advances, current challenges, and future directions
QTY2 Polymat 797 High-Temp Spray Adhesive Automotive Upholstery Glue [160F] : Office Products
POWERFUL GLUE - Shoemaking & Car Upholstery
Powerful Heat Activated Glue For Strength
STRONN Polyurethane Heat Activated Adhesive Glue Automotive for Upholstery shoe leather – cmodd
