Foundation Armor 2-GAL Pro-Grade Water Based Epoxy Concrete Floor Coating

The Armor S2000 comes in concentrate and must be diluted with up to 3 gallons of water. It penetrates deep into the surface of the concrete where it chemically reacts to form a permanent Calcium Silicate Hydrate CSH structure within the pores. Concrete sealed with the Armor S2000 will experience an increase in surface strength and density up to 45%. While the Armor S2000 is a breathable sealer the movement of water moisture and efflorescence through the pores of the concrete will be reduced.

Foundation Armor Concrete Sealer Hardener and Densifier 1 gal. Concentrated Sodium Silicate S2000

The Armor AR500 is a solvent-based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a high gloss wet look.

AR500

The Armor AR500 is a penetrating high gloss pure acrylic sealer designed for use on virtually all types of interior and exterior concrete and paver surfaces. The durable, non-yellowing high gloss finish offers superior resistance to rain, the sun, cold and hot climates, stains and more. When applied to dull or faded surfaces it will help to enhance the natural characteristics. It can be applied to unsealed surfaces or to surfaces previously sealed with a solvent based acrylic sealer.

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (1 gal)

The Armor WB25 is a water based acrylic cure and seal that meets or exceeds ASTM 1315 and ASTM C 309 standards. When properly applied, the Armor WB25 will help concrete to properly cure by reducing premature moisture loss. It will also help to reduce deterioration caused by surface abrasion, foot traffic, and spills.

Armor WB25 High Gloss Water Based Acrylic Concrete Cure and Seal (5 gal)

The Armor Epoxy is a 2-Part water based epoxy primer and top coat system for interior concrete floors. It can be used as a primer to other coating systems or alone as a primer and top coat. It overs superior penetration and bonding characteristics and can withstand up to 6 lbs. of moisture. It is resistant to hot tire pickup, mold and mildew, chemicals and more. It is long lasting and easy to apply.

Armor Epoxy - 2-Part Water Based High Gloss Epoxy Floor Coating

The Armor Matte pack is a matte additive for solvent based concrete sealers and solvent based urethane coatings. 1-2 containers of matte pack can be added to up to 5 gallons of sealer/coating. Depending on the amount added, the Armor Matte pack will reduce or eliminate sheen or gloss.

Gloss Reducing Matte Pack for Solvent Based Acrylic Sealers and Urethane Coatings

Armor CR100 Acrylic Sealer Remover, Urethane Coating Remover

Armor AR350 Wet Look Concrete Sealer and Paver Sealer with Low

Commercial Epoxy Flooring

The WL550 is a penetrating, matte wet look water repellent sealer for unsealed concrete, brick, flagstone, slate, natural stone, and masonry. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. It will slightly darken the surface to enhance any dull and faded coloring. The WL550 is made from high quality, non-recycled, US manufactured resins.

Foundation Armor WL550 Wet Look Transparent Concrete Sealer - Clear Matte - 5 Gal

Commercial Epoxy Floor Coating - Bing - Shopping

ArmorPoxy 2 part 85% solids Polyaspartic, a high-performance clear topcoat designed to elevate the durability and aesthetics of your floors. This advanced Polyaspartic formula boasts exceptional chemical resistance, UV stability, abrasion resistance, and hardness, ensuring your floors remain protected and visually stunning for years to come. Experience unparalleled versatility as this topcoat seamlessly complements various flooring systems, including epoxy floor coatings and metallic epoxy.

Armorpoxy 2 gal. Clear Gloss 2 Part Epoxy Polyaspartic Interior/Exterior, Concrete Basement and Garage Floor Paint