Ruler Quilting Foot –

Leah Day's favorite ruler foot for ruler quilting on a low shank domestic machine.
Learn how to quilt with rulers with this special quilting foot! This ruler foot is designed to fit the Eversewn Sparrow 20, as well as all low shank sewing machines. The high lip and exact ½ inch circular base on this quilting foot allows you to use rulers to guide the quilting design. Learn how this works in this new quilting tutorial: Note: this ruler quilting foot is designed to fit the Eversewn Sparrow sewing machines which are compatible with Low Shank quilting feet. Click Here to contact us of you’re unsure if this foot will fit your machine. How to Start Ruler Foot Quilting A ruler quilting is a style of free motion quilting so whatever settings you use for free motion quilting should be the same when you quilt with this foot. Here’s how I begin ruler foot quilting: I attach the foot to the machine and adjust the height so when the foot is in the down position it skims lightly over the surface of my quilt. I then make sure the machine is straight stitching and change the stitch length to 0.0 mm or the lowest setting the machine allows. This stops the feed dogs from moving so they don’t pull against the quilt. I also cover the machine bed with a Queen Supreme Slider to make the quilt easier to slide over the surface. Then with the foot in the down position, I drop the needle down and back up to bring up the bobbin thread to the surface of the quilt. Never drop your needle when this ruler quilting foot is in the UP position. The needle bar will hit the top of the foot and possibly damage your machine. Finally I slide the quilt under the foot and position my ruler and begin quilting. When quilting with rulers on your home machine, you will move the quilt AND the ruler at the same time through the arm of the machine. For this reason, you may want to attach True Grips to the back of your rulers so they grip the quilt and don’t slide out of position. You can also use this ruler foot for general free motion quilting too. Ruler foot quilting is basically a form of free motion quilting so you can quilt both using the ruler as a guide, then set the ruler aside and flow into free form filler designs as well.

YRDQNCraft Quilting Ruler Foot, Low Shank Ruler Foot for Quilting Rulers- Darning Embroidery Presser Foot Fits All Low Shank Sewing Machines

Low Shank VS High Shank Ruler Foot

1/4 Ruler Quilting Foot #40166729 - Juki TL-98Q, TL-2010, TL-2200QVP - Cutex Sewing Supplies

Ruler Quilting Foot –

Ruler Quilting Foot –

Know Your Machine Shank Type: To know your sewing machine's shank type, all you need to do is lower your machine's foot and measure the distance between the screw hole and the needle plate. If your measured distance is 1 inch, then you need a High shank ruler foot. if you measured 1/2 inch, then you need a low shank ruler foot. Refer to our listing images to learn more.

DABLINE High Shank Free Motion Quilting Ruler Foot, Silver

Ruler Quilting Foot For Juki TL-2000QI,TL-2010Q,TL-2200QVP Mini,DDL-8700,TL-98QE

The Convertible Free Motion Quilting Foot Set is an excellent foot for free motion quilting. This set of low shank feet with attachments has

Convertible Free Motion Quilting Foot Set

Package: you will receive 2 pieces of low shank ruler feet in 2 styles, one of them comes with slits, meeting your different needs Material: these

2 Pieces Low Shank Ruler Quilting Foot for Free Motion 1/4 Inch Thick Rulers, Ruler Quilting Pressure Foot Compatible with Singer Brother Kenmore

Juki TL Series 1/4 Quilting Ruler Foot. 401-66729