This Cutters item by LeatherMob has 80 favorites from shoppers. Ships from Hong Kong. Listed on Jan 19, 2024
Material: walnut with brass hardware
This belt cutter is suitable for beginners and professionals. For cutting strips up to around 6.5 cm wide. Made with North American walnut wood. It is easy to use, after some practice, you can cut straps perfectly in the desired width.
Two crossbars firmly hold most weights of leather. If the leather is 4 mm in thickness, adjust the crossbars to 4.5-5 mm for better cutting. The principle of setting the spacing of the crossbars is slightly larger than the leather thickness but not too much. Before cutting, make sure the two crossbars are parallel, you can adjust 3 brass screws to achieve this.
IMPORTANT
For stiff or thickness over 5 mm types of leather, you may have a hard time using this tool.
There might be a 0.4 mm tolerance of cutting width. This is due to the thickness of the blade and the tension of the leather.
Strap cutter - Leather Artisan Lab
Walnut Leather Belt
Leather Craft Belt
Leather Craft Belt
30mm Belt Buckles Set Strap Japan Elegant LeatherMob Leathercraft Leather
Geji Adjustable Belt Strap Cutter Leathercraft Walnut Line Edge
Adjustable Leather Strip and Strap Cutter Maker Cutting Handcraft
Leather Belt Strips
Belt Leather Strips
V2 Geji Adjustable Leather Belt/Strap Cutter -Walnut & Bakelite
Leather Lined Belt
Strop Walnut
Belt/strap Center Punch Guide